The Canon PIXMA S200SPx is part of the Canon PIXMA photo printer series, featuring Bubble Jet in-demand printing technology. At its peak performance, it boasts a print resolution of 2880 x 720 dots per inch. In addition, the ink droplets can run as small as 1/2880 inches. However, the printing speed is dependent on the printing mode and the complexity of the document being printed.
Canon PIXMA S200SPx printer driver for Windows
| Filename | Size | Download |
| Printer Driver for Windows XP.exe | 2.29 MB | |
| Printer Driver for Windows Vista.exe | 590.09 kB | |
| Printer Driver for Windows 7 8 8.1 10.exe | 4.08 MB |
Canon PIXMA S200SPx driver Supported Macintosh Operating Systems
| Filename | Size | Download |
| Printer Driver for MAC Operating Systems.dmg | 4.97 MB |
Specifications
In draft mode, the printer can produce black and white prints at a speedy 5.0 pages per minute (ppm). However, color prints are at a slower rate of 3.0 ppm in the same mode. In standard mode, black and white prints have a printing rate of 3.8 ppm, whereas color prints have a slower rate of 1.6 ppm. This device also supports bi-directional printing, and it can print pages with a maximum width of 8.0 inches.
The Canon extended mode is available on the machine for resident print control. This feature allows the machine to receive a buffer of up to 64 KB. The interface of the machine includes a USB 2.0 hi-speed port, while the interface connector is a USB standard Series B receptacle. For optimal performance, it is recommended that users utilize a printer cable with a data wiring pair of AWG28 type. Additionally, the cable should have a twisted pair shield and be no longer than 5.0 m in length. Keep in mind these specifications when selecting a printer cable to ensure smooth operation of the machine.
During operation, the Canon PIXMA S200SPx emits an acoustic noise level of approximately 43 dB (A) when producing prints of the highest quality. To ensure optimal performance, it is recommended to maintain a temperature range of 5 to 350C in the operating environment. Additionally, the relative humidity should be within the range of 10 to 90% RH, without any condensation.
In terms of physical dimensions, the printer boasts a width of 390 mm and a depth of 189 mm. It stands at a height of 162 mm and weighs up to 2.4 kg.